600W DC-DC, the boost modules, mobile, car, laptop power supply,10-60V or 12-80V

Product Description

Boost module 600W high power, wide voltage input: the 10V ~~ 60V, Output adjustable 12V ~~ 80V wide voltage; adjustable output current; ultra-low dropout.

Detailed parameters:

    Input voltage: 10V-60V

    Input Current: Maximum input current 15A

    Output voltage: 12V-80V continuously adjustable

    Output current: maximum output current of 10A (adjustable)

    Output power: effective power P = input voltage V * 10A

    Conversion efficiency: up to 95% (input voltage and current; conversion efficiency of the output voltage, current impact)

Short-circuit protection: fuse

Installation size: 73 * 51mm

Weight: 251g

1 products chronological materials, custom radiator Specifications: Radiator floor thickness 5mm, tooth height 21mm, length 85mm, width 63mm boost above the plate fixed radiator, rationalization of design, radiator and boost board integration design user-friendly direct use, use of directly using long screws can be fixed.

Inductor magnetic ring adopts bead of 27mm Sendust, 1mm double wire wound inductors, high-quality filter capacitor, enter a 1000uF63V electrolytic capacitors to output two 470uF100V electrolytic capacitors boost output power quality is better on-board power supply switch, power indicator, voltage regulation, current adjustment potentiometer so that the output is more convenient, you can always adjust the output voltage, the current size of the input and output using 8500 terminals, through the current ability to ensure a long time reliable.

Applications:

1. DIY an output adjustable vehicle power supply, only need 12V power input access, output voltage (14V-80V) free and continuous adjustment of the output voltage can not be lower than the input voltage.

2. Universal car laptop power supply. 12V power input connected to the output regulation voltage notebook need to work.

Boost charger, 12V power higher than 12V battery charging, for example, 24V battery and charging current can be adjusted.

Powered electronic equipment, as long as the voltage is adjusted to the desired voltage and current does not exceed the rated current can work properly.

5. System level power supply before, doing a project, input 10V-18V, system board needs about 24V of power and a great power, general DC-DC module power is too small, then the module will be your most good choice, do not debug directly on the machine can work easily do high-efficiency high-power boost.

The module application example:

An input voltage of 12V current 4.17A, boost output voltage of 20V current 2.4A, module efficiency of 97%

Input voltage of 54V current 13.5A, output 58V current of 12A, use 5Ω1Kw resistor as a load test, the efficiency of 95%

3 module output 965W test chart, use 5Ω1Kw resistance as load testing 

600W DC-DC, the boost modules, mobile, car, laptop power supply,10-60V or 12-80V

Abbiamo disponibili datasheet di tutti i componenti, qualora non fosse presente nella scheda download del prodotto inviaci un messaggio dal modulo contattaci e lo pubblicheremo il prima possibile nel nostro sito.