LC100-S, inductance table, capacitance meter, inductance capacitance meter

Product Description

LC100-S, inductance table, capacitance meter, inductance capacitance meter

LC100 Series inductance capacitance table is divided into LC100-S -and LC100-A type two models , LC100-S is a standard type , a small capacitance 0.01pF-10uF, small inductor 0.001uH-100mH, large inductance 0.001mH-100H three stalls , while the LC100-A type is a full-featured , in addition to the above three stalls , but added 1uF-100mF large electrolytic capacitor test function , all the stalls are automatic range .

This product relative to the finished product on the market inductance capacitance meter ( such as 6243 series ) in the small value of the test has an absolute advantage is the accuracy and minimum resolution , and has a flexible line calibration measurement accuracy can be maintained at all times . Instrument does not use any potentiometer adjustment , calibration parameters are fully stored in internal FLASH microcontroller , power-down is not lost , other than the potentiometer calibration methods must be accurate and convenient.

Basic technical indicators:

Measurement accuracy : 1%

Capacitance Measuring Range : 0.01pF-10uF

Minimum resolution : 0.01pF

Inductance Range : 0.001uH-100mH

Large inductance measurement range : 0.001mH-100H

Minimum resolution : 0.001uH

Test Frequency: capacitors, inductors file is about 500kHz, large inductance of about 500Hz,

          Can display current test frequency value

Effective display digits: 4

Display: 1602

Power supply : miniUSB interface to take power

Using SMD component soldering , stable and reliable !

This table test frequency is relatively high, not suitable for measuring the electrolytic capacitors in the measurement is greater than 1uF capacitor , there will be greater error , the greater the closer 10uF error , we indicators given 1uF ~ 10uF error of 5% is just a mean , may actually greater than this value .