STM32 STM32F103RBT6 Development Board w/ 2.8&quot, TFT LCD Touch Screen

Product Description

STM32 STM32F103RBT6 Development Board w/ 2.8&quot TFT LCD Touch Screen 

• CPU: STM32F103RBT6
• USB interface for USB communication experiment
• ARM Cortex-M3 core, 128kB Flash, 20KB RAM, maximum operating clock is 72MHz, 64 pin
• USB to RS232 (ISP download) for RS232 communication experiment (method of access to ISP programming mode: Press RESRT and BOOT0 at the same time, release the RESET button, release BOOT0 button)
• The standard ARM JTAG 20 PIN simulation interface block (for easy connection JLINK, ULINK2 other mainstream emulator)

Feature

• Brand new and high quality
• ARM Cortex-M3 processor is the latest generation of ARM processors for embedded systems
• It has been developed to provide a low-cost platform that meets the needs of MCU implementation, with a reduced pin count and low-power consumption
• While delivering outstanding computational performance and an advanced system response to interrupts
• The ARM Cortex-M3 32-bit RISC processor features exceptional code-efficiency, delivering the high-performance expected from an ARM core in the memory size usually associated with 8-bit and 16-bit devices
• The STM32F103 Performance Line family has an embedded ARM core and is therefore compatible with all ARM tools and software
• It combines the high performance ARM Cortex-M3 CPU with an extensive range of peripheral functions and enhanced I/O capabilities
• This is low cost development board for the new ST Cortex-M3 based microcontrollers STM32F103RBT6
• STM32F103RBT6 ARM Cortex-M3 32-bit with 128KB Program Flash, 20KB RAM, USB, CAN, I2C x2, ADC 12-bit x2, UART x3, SPI x2, TIMERS x3 up to 72Mhz operation
• 2.8-inch TFT true color touch screen module, configuration ADS7843 (or RSM1843 instead) controller, support for a SD card (SPI mode) can be used to store pictures, in support of AT45DBxxx of a DATA FLASH (can be used for storage)
• 32×240 resolusion with 65536 colours
• USB interface,USB power supply , (USB download)
• Standard JTAG connector with ARM 2×10 pin layout for programming/debugging with ARM-JTAG
• 4 users LED lights,a power indicator light, a USB communication indicator, two user keys
• 8MHz crystal oscillator?32768 Hz crystal and RTC backup battery connector
• All I / O port through the standard pitch leads 2.54mm
• Board Size: 82X 56mm

Abbiamo disponibili datasheet di tutti i componenti, qualora non fosse presente nella scheda download del prodotto inviaci un messaggio dal modulo contattaci e lo pubblicheremo il prima possibile nel nostro sito.